Free60-Wiki

The Xbox 360 Case is made of plastic and was originally made to be hard to open. However it can easy be removed :

Remove the HDD
Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards

![](Face_removedzz.jpg "File:Face_removedzz.jpg")

You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders

Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
Then insert a small tool in each hole of the backplate and onpup the back side

You now can lift up the upper part of the casing

To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver.

![](Underside3.jpg "File:Underside3.jpg")

Downside of the metal casing

![](Therm_removed.jpg "File:Therm_removed.jpg")

Motherboard

Category:Xbox360_Hardware